CADILLAC Escalade Air bag cash Reset Chip Location

In the Cadillac Escalade, the airbag control module, also known as the SRS (Supplemental Restraint System) module, is typically located beneath the driver’s seat or under the center console, depending on the model year.

Steps to Access the Airbag Control Module:

1. Disconnect the Battery:
   • Before beginning any work, disconnect the vehicle’s battery to prevent accidental airbag deployment.
   • Remove the negative cable first, followed by the positive cable.
2. Locate the Module:
   • Under the Driver’s Seat:
     • Move the driver’s seat to its rearmost position to gain access.
     • Lift the carpet or remove any protective covers to expose the module.
   • Under the Center Console:
     • Remove the center console by detaching any trim pieces and screws securing it.
     • Lift the console to expose the area beneath.
3. Identify the Module:
   • The airbag control module is a metal box with a bright yellow connector, which is standard for airbag system components.
4. Unbolt and Disconnect:
   • Once the module is accessible, use appropriate tools to unbolt it from its mounting position.
   • Carefully disconnect the wiring harnesses connected to the module, noting their positions for reinstallation.

Important Considerations:

• Safety Precautions:
  • Always disconnect the battery and wait for at least 3 minutes before working on the airbag system to ensure residual power is discharged.
  • Handle the airbag module and related components with care to avoid triggering the airbags.
• Professional Assistance:
  • If you’re not experienced with automotive safety systems, it’s advisable to seek assistance from a qualified technician to ensure proper handling and maintenance.

For a visual guide on locating and removing the airbag control module in a Cadillac Escalade, you may find the following video helpful: